17W LED AR111
LED Light Source
With Driver installation:
Without Driver installation:
- The product out of the box after picking up, then firstly power distribution, power outlet at each end.
- With a pin for DC12V output line. Two PIN to plug in this line of GU53 AR111 lamp socket.
- Without pin bring the cable to supply mains.
- After the above installed, placed on a dedicated AR111 lamps, and fixed
Without Driver installation:
- First look at the drive power is AC90-265V input or not, output whether DC12V. Then confirms inputs and output.
- The power supply output connects to the AR111 GU53 lamp holder of two PIN on. Without check the positive and negative points.
- Then put input end to the supply mains.
- After the above installed, placed on a dedicated AR111 lamps, and fixed
Specification
| Model No. | LOB-AR111C17F8 | LOB-AR111N17F8 | LOB-AR111W17F8 |
|---|---|---|---|
| Input Voltage | AC/DC 12V | AC/DC 12V | AC/DC 12V |
| Rated Power | 17W | 17W | 17W |
| Total Lumens | 1275 lm | 1200 lm | 1200 lm |
| Lumens Efficiency | 75 lm/W | 70 lm/W | 70 lm/W |
| Color Temp. | 6000 K | 4000 K | 2700 K |
| CRI | >80 | >80 | >80 |
| Power Fastor | >0.9 | >0.9 | >0.9 |
| Operating Temp. | -25℃~40℃ | -25℃~40℃ | -25℃~40℃ |
| Base | GU53 | GU53 | GU53 |
| Life Time | ≧ 40000 hrs | ≧ 40000 hrs | ≧ 40000 hrs |
| Beam angle | 30° | 30° | 30° |
| Dimensions | 111(D) X 67(H) mm | 111(D) X 67(H) mm | 111(D) X 67(H) mm |
| Weight | 215 ± 20g | 215 ± 20g | 215 ± 20g |
Remarks
1.The tolerance of luminous flux is ±10%.
2. The dimension tolerance is ±5mm.
3.Laster Tech Corporation LTD. All rights reserved. Product specifications are subject to change without notice.
1.The tolerance of luminous flux is ±10%.
2. The dimension tolerance is ±5mm.
3.Laster Tech Corporation LTD. All rights reserved. Product specifications are subject to change without notice.
Wring Diagram
Attention:
1. AR111 is 12V low voltage product input is not connected directly to the supply mains.
2. AR111 not be compatible with traditional ballast, so be sure to remove the original when alternative ballast, LED driver power supply replaced.
2. AR111 not be compatible with traditional ballast, so be sure to remove the original when alternative ballast, LED driver power supply replaced.
